C-12 Quick Release Clamp - Installation Instructions
M6 Threaded Hole (Deep) |
Step 1: Fasten the C-12 to the ball head using the enclosed M6 screw. If the screw is too long and bottoms-out in the hole prematurely, use the shallow hole instructions here. |
||
Step 2: Tighten the 3 set screws, using the enclosed 2.5mm hex key. Lightly tighten all three, then go back and firmly tighten each one. |
||
|
© Copyright 2020 - Wimberley, Inc. - All Rights Reserved
Made in USA and Assembled in Charlottesville, VA |