Wimberley Professional Photo Gear - Quick Release Clamps

C-12 Quick Release Clamp - Installation Instructions

3/8” Threaded Stud

Step 1: Screw the C-12 onto the Ball Head’s threaded stud. Screw it on as tightly as you can (lock the ball head down and give it some muscle).

Step 2: Tighten the 3 set screws snugly, using the enclosed 2.5mm hex key (see note below If you are attaching to a cork/rubber coated surface). .
Note: If the platform you are attaching the C-12 to is fully coated with cork or rubber, so that the set screws are not engaging a metal surface, tighten only the set screw farthest from the clamp’s moving jaw. This will force the bottom edge of the clamp into full contact with the rubber/cork coated platform and create a more robust connection. You can remove the 2 set screws that you are not using.