|
Installing the C-12:
Screw the Brass Bushing into the threaded hole in the stem of the head (use a penny or similar sized coin as an installation tool). Screw the bushing in fully. It should be flush with the top surface of the stem (or slightly recessed). | Screw the clamp onto the ball head as tightly as possible. | Tighten the three set screws firmly using the 2.5mm hex key. |
C-12 Installed:
© Copyright 2020 - Wimberley, Inc. - All Rights Reserved
Made in USA and Assembled in Charlottesville, VA |