Back to Previous Page
C-12 Installation Instructions: Manfrotto 490RC4


Removing the Existing Clamp:   

Loosen the smaller screw with a 2.5mm hex key. Remove the clamp's central fastener using the enclosed 5/32 hex key. Removal complete.

Installing the C-12:   

Insert and tighten the head's original 6mm fastener (not the fastener included with the clamp) with the enclosed 5/32 hex key.

Note: Our fastener is too long and will not work properly.

Tighten the three set screws firmly using the 2.5mm hex key.  

C-12 Installed:   

      © Copyright 2020 - Wimberley, Inc. - All Rights Reserved                                         Made in USA and Assembled in Charlottesville, VA 

  View Cart 

  Follow Us! 

  Email List