Back to Previous Page
C-12 Installation Instructions: Manfrotto 468MGRC4

 

Removing the Existing Clamp:   
Loosen the smaller screw with a 2.5mm hex key. Remove the clamp's central fastener using the enclosed 5/32 hex key. Removal complete
  

Installing the C-12:   
Fasten the clamp to the ball head using the enclosed M6 Screw. Tighten the three set screws firmly using the 2.5mm hex key.  

C-12 Installed:   

© Copyright 2011 - Wimberley, Inc. - All Rights Reserved

  View Cart  items -